Black Mold Removal

Cleaning up Toxic Black Mold is a time consuming task. Making sure you do it right and in the correct order is essential to ensuring that you remove the black mold for good and that it wont slowly regenerate. This step-by-step guide will inform you of the correct procedure, follow them in order and you can say goodbye to the mold problem.

Step 1 – Locate Moisture Source and Prevent Future Leaks

Moisture is the number 1 cause of mold build up. Unless you fully prevent the course of moisture the area will soon grow thick with mold once more. Ensure you successfully identify the source of moisture; normally a leaking pipe or hole in a building is to blame.

Floods and water leaks are major causes of Black Mold build up. Any area where water has accumulated should be fully dried up using fans and dehumidifiers. Wet furniture or items should be lifted from the floor to ensure the mold doesn’t contaminate them also.

Black mold will grow in as little as 24-48 hours so it is important you address and leaks quickly. The faster you remove any contaminated areas the more successful and less intrusive the mold will be.

Step 2 – Seal Off The Area

It is essential that before you begin cleaning up any mold that the area is well sealed. Once you disturb the black mold, black mold spores will be sent into the air and begin to spread. To ensure other areas are not further contaminated clean one room at a time.

The most effective way to seal off a room is by using plastic sheeting and duct tape. Ensure all air holes into the room are well covered. In bad cases it may be necessary to purchase an air purifier to extract the dust created from the room. Some people use exhaust fans to pump the air out of an open window.

Step 3 – Black Mold Removal

It is never a good idea to keep the mold perfectly dry, when scrubbed it will instantly turn to dust vapor and take to the air. Keep the mold moist and this will be mostly prevented.

Rub the infected area down with soapy water. Fairy liquid or stronger products are ideal as they help remove the bulk of the mold. Special soaps can be found designed for black mold removal but these will increase the cost and are not always necessary.

Once the bulk of the mold is removed apply a strong disinfectant to kill any surviving mold spores. Many types of bleach are available to do this. Rub down uninfected areas to ensure any mold spores have not been missed.

Remove all contaminated products or sheets of mold in sealed bags; heavy-duty plastic sacks are ideal for this.

Step 4 – Dry up & Check for Success

The area should be dried to ensure that any spores left behind do not have an environment to spread in. If any do spread again the lack of moisture will keep the contaminated to a minimum.

Ensure the initial moisture problem is still resolved and check for any last signs of mold left behind. Well done, you should have now of Removed your black mold.

You could alternatively employ a black mold removal company. Black mold removal cost can be mostly avoided however by doing the work yourself.